[LSUOptions]
LSUTextFile=1

[form1Buttons]
ID_EXIT=&Exit
ID_NEW=&New
ID_OPEN=&Open
ID_SAVE=&Save
ID_SAVE_AS=&Save as
ID_NEWLINE=New &Line
ID_DELLINE=Delete Line
ID_PRGFILE=Prog. File
ID_PRGULOAD=Upload
ID_HEXFILE=Create HEX file
ID_EXEC_STATEMENT=Execute Instruction
ID_EXEC_NEXT=Next step
ID_EXEC_STOP=Stop debug execution
ID_EXEC_DEBUG=Start/stop the program
ID_ABOUT=&About
ID_RESETPRESETS=R
ID_SAVEPRESETS=S
ID_LOADPRESETS=L
ID_NEXT_INSERT=

[form1ButtonHints]
ID_EXIT=Exit the program
ID_NEW=Create a new file
ID_OPEN=open a file
ID_SAVE=save the actual file
ID_SAVE_AS=save as
ID_NEWLINE=Add a new line to the program
ID_DELLINE=Delete the actual line
ID_PRGFILE=Show the programming file
ID_PRGULOAD=Upload the program to the target
ID_HEXFILE=Create a HEX file
ID_EXEC_STATEMENT=Execute a single instruction
ID_EXEC_NEXT=Execute the next step
ID_EXEC_STOP=Stop the debug program execution
ID_EXEC_DEBUG=Start/stop the program
ID_ABOUT=About this program
ID_RESETPRESETS=reset all presets
ID_SAVEPRESETS=save presets to file
ID_LOADPRESETS=load presets from file
ID_NEXT_INSERT=goto next row, add row if necessary
ID_EXAMPLE=Load example from web

[infobox]
ID_APPTITLE=TPS/PLC Emulator
ID_COPYRIGHT=MCS (C) 2021 Wilfried Klaas #13#10 EMail: w.klaas@gmx.de

[form1Captions]
ID_TPS_VERSION=PLC target: 
ID_OUTPUT=Outputs
ID_INPUT=Inputs
ID_INTERNAL_DATA=Internal data
ID_CONTROL=Control
ID_OUTPUT_1=Output 1
ID_OUTPUT_2=Output 2
ID_OUTPUT_3=Output 3
ID_OUTPUT_4=Output 4
ID_INPUT_4=Input &4
ID_INPUT_3=Input &3
ID_INPUT_2=Input &2
ID_INPUT_1=Input &1
ID_REFRESH_ADDR=Refresh address
ID_IGNORE_DELAY=Ignore Delay
ID_MNEMONIC=Instruction
ID_MNE_DATA=Data
ID_CAPTION=TPS/PLC Emulator
ID_GRID_STORAGE=Memory
ID_GRID_MNEMONIC=Instruction
ID_GRID_DATA=Data
ID_GRID_DESCRIPTION=Descr.
ID_GRID_COMMENT=Comment
ID_SAVE_TPS=File save as
ID_SAVE_HEX=File save as
ID_SAVE_BIN=File save as
ID_OPEN=Open program
ID_SAVE=Save program
ID_SAVE_AS=Save program as
ID_CLICK_HERE= or click here.
 
[form1Hints]
ID_TPS_VERSION=TPS target system for this program
ID_OUTPUT=Outputs
ID_INPUT=Inputs
ID_INTERNAL_DATA=Data for internal processing
ID_CONTROL=Control
ID_OUTPUT_1=Output 1
ID_OUTPUT_2=Output 2
ID_OUTPUT_3=Output 3
ID_OUTPUT_4=Output 4
ID_INPUT_4=Input 4
ID_INPUT_3=Input 3
ID_INPUT_2=Input 2
ID_INPUT_1=Input 1
ID_REFRESH_ADDR=Refresh address
ID_IGNORE_DELAY=on execution ignore any delay command
ID_MNEMONIC=Instruction
ID_MNE_DATA=Data
ID_CAPTION=
ID_GRID_STORAGE=Adress
ID_GRID_MNEMONIC=Instruction
ID_GRID_DATA=Data
ID_GRID_DESCRIPTION=Description
ID_GRID_COMMENT=Notes / Comment
ID_BTN_PRG_SEL=PRG selected
ID_BTN_PRG_NON=PRG not selected
ID_BTN_SEL_SEL=SEL selected
ID_BTN_SEL_NON=SEL not selected

[form2Captions]
ID_CAPTION=Program file

[form2Hints]
ID_CAPTION= 

[form2Buttons]
ID_CLOSE=&Close

[form2ButtonHints]
ID_CLOSE=Close window

[form1Filter]
ID_SAVE_TPS=TPS/PLC files (*.tps)|*.tps|all files (*.*)|*.*
ID_SAVE_HEX=Intel Hex file (*.hex)|*.hex|all files (*.*)|*.*
ID_OPEN=TPS/SPS file (*.tps)|*.tps|all files (*.*)|*.*
ID_SAVE=TPS/SPS file (*.tps)|*.tps|all files (*.*)|*.*
ID_SAVE_BIN=binary file (*)|*|all files (*.*)|*.*

[form1Action]
ID_EXIT=&Exit
ID_OPEN=Open
ID_SAVE=Save
ID_DEBUG=Start/Stop program
ID_NEXT_STEP=Next step
ID_STOP=Stop debug
ID_EXEC_MNEMONIC=Execute instruction
ID_SHOW_HEX=Show HEX file
ID_UPLOAD=Upload program
ID_NEW=New program
ID_NEW_ROW=New line
ID_DEL_ROW=Delete line
ID_SAVE_FILE=Save file
ID_ABOUT=About
ID_HEX_FILE=Create HEX file

[form1ActionHints]
ID_EXIT=Exit program
ID_OPEN=Open program
ID_SAVE=Save program
ID_DEBUG=Start/Stop program
ID_NEXT_STEP=Execute next step
ID_STOP=Stop debug
ID_EXEC_MNEMONIC=Execute instruction
ID_SHOW_HEX=Show HEX file
ID_UPLOAD=Upload program to TPS/PLC
ID_NEW=New program
ID_NEW_ROW=New line
ID_DEL_ROW=Delete actual line
ID_SAVE_FILE=Save file
ID_ABOUT=About this program
ID_HEX_FILE=Create HEX file

[statusbar]
ID_SPS_START=Starting PLC
ID_SPS_RUNNING=PLC running
ID_SPS_STOPPED=PLC stopped
ID_SPS_PROGRAMMING=programming PLC

[hexfile]
ID_START_LINE=Addr   BD   Inst.    Data      Comment  

[MessagesMSG]
ID_MB_WARNINGT=Warning
ID_MB_QUESTIONT=Question
ID_MB_INFOT=Information
SAVE_CHANGESM=The program has been changed. Do you want to save the changes?
ID_UPLOAD_OKM=Pogram uploaded.
ID_NOT_READYM=Arduino not responding. Maybe not connected, SEL not pressed oder wrong firmware version?
ID_PRG_TO_LONGM=The program is to long for the selected hardware.


[frmSelectComCaptions]
ID_COMPORT=Port
ID_ARDUINO_INST=Arduino installation
ID_COMMENT=Please select the port of the arduino.
ID_COMMAND_HINT=To upload, please hold the SEL button down until a message appears.

[frmSelectComHints]
ID_COMPORT=Com Port
ID_ARDUINO_INST=Arduino installtion
ID_COMMENT=Comment